| PROPERTY | TEST METHOD | UNIT | TYPICAL VALUE |
|---|---|---|---|
| Density -Specific Gravity | ASTM D 792 | Sp gr 23/23ºC | 1.41 |
| Melt Mass-Flow Rate (MFR) | ASTM D 1238 | g/10 min | 9.0 |
| Mold Shrink, Linear-flow | ASTM D955 | In/in | 0.022 |
| Mold Shrink, Linear-Trans | ASTM D955 | In/in | 0.018 |
| Water Absorption Sat/23ºC | ISO 62 | % | 0.75 |
| Water Absorption 23C/50RH | ISO 62 | % | 0.20 |
| Tensile Modulus2 | ISO527-1, -2 | psi | 400000 |
| Tensile Strength @ Yield (-40 ºF) (73 ºF) (160 ºF) | ASTM D638 | Psi Psi Psi | 13700 8800 5000 |
| Tensile Stress at Yield3 | ISO 527-1, -2 | Psi | 9570 |
| Tensile Strain at Yield3 | ISO 527-1, -2 | % | 10 |
| Flexural Modulus (73 ºF) | ISO 178 | psi | 370000 |
| Notched Izod Impact Strength (73 ºF)4 | ISO 180 | Ft-lb/in2 | 2.71 |
| DTUL @264psi-Unannealed | ASTM D 648 | ºF | 230 |
| Melting Point | ºF | 329 | |
| Volume Resistivity | ASTM D527 | Ohm-cm | 1.0E+14 |
