Polycarbonate 3127 - mobasherin Co.

PROPERTY	TEST METHOD	UNIT	TYPICAL VALUE
Melt volume-flow rate, MVR	ISO 1133	cm3/10min	6
Temperature	ISO 1133	ºC	300
Load	ISO 1133	kg	1.2
Molding shrinkage, parallel	ISO 294-4,2577	%	0.7
Molding shrinkage, normal	ISO 294-4,2577	%	0.8
Tensile Modulus	ISO 527-1/-2	MPa	2400
Yield stress	ISO 527-1/-2	MPa	67
Yield strain	ISO 527-1/-2	%	6.2
Nominal strain at break	ISO 527-1/-2	%	>50
Tensile creep modulus, 1h	ISO 899-1	MPa	2200
Tensile creep modulus, 1000h	ISO 899-1	MPa	1900
Charpy impact strength, +23ºC	ISO 899-1	kJ/m2	N
Charpy impact strength, -30ºC	ISO 179/1eU	kJ/m2	N
Puncture- maximum force, +23ºC	ISO 6603-2	N	5500
Puncture- maximum force, -30ºC	ISO 6603-2	N	6400
Puncture- energy, +23ºC	ISO 6603-2	J	60
Puncture- energy, -30ºC	ISO 6603-2	J	65
Glass transition temperature,10 ºC/min	ISO 11357-1/-2	ºC	146
Temp. of deflection under load, 1.80 MPa	ISO 75-1/-2	ºC	128
Temp. of deflection under load, 0.45 MPa	ISO 75-1/-2	ºC	140
Vicat softening temperature, 50 ºC/h 50N	ISO 306	ºC	146
Coeff. Of liner therm. Expansion, parallel	ISO 11359-1/-2	E-6/K	65
Coeff. Of liner therm. Expansion, normal	ISO 11359-1/-2	E-6/K	65
Burning Behav. at Thickness h	IEC 60695-11-10	Class	HB
Thickness tested	IEC 60695-11-10	mm	0.8
UL recognition	-	-	UL
Oxygen index	ISO 4589-1/-2	%	28
Relative permittivity, 100Hz	IEC 60250	-	3.1
Relative permittivity, 1MHz	IEC 60250	-	3
Dissipation factor, 100Hz	IEC 60250	E-4	8
Dissipation factor, 1MHz	IEC 60250	E-4	95
Volume resistivity	IEC 60093	Ohm* m	>1E13
Surface resistivity	IEC 60093	Ohm	>1E15
Comparative tracking index	IEC 60112	-	250
Water absorption	Sim.to ISO62	%	0.3
Humidity absorption	Sim.to ISO62	%	0.12
Density	ISO 1183	Kg/m3	1200
Luminous transmittance	ISO 13468-1, -2	%	88
Density of melt	-	Kg/m3	1020
Injection molding, melt temperature	ISO 294	ºC	300
Injection molding, mold temperature	ISO 10724	ºC	80
Injection molding, injection velocity	ISO 294	mm/s	200